Rinsten Spring - The Ultimate Bicycle Shock Absorber.
Created by Rinsten
Rinsten Spring is a bike shock absorber. It offers you comfort during cycling and keeps your body healthy.
Whether you start a season riding your bike after a long pause, or you are just a regular bike rider who likes to ride your bike around town, our Spring will minimize those annoying bumps and vibrations that plague all cyclists.
Latest Updates from Our Project:
We have finished the production and now we are starting the shipment of your Rinsten Springs!
about 1 month ago
– Mon, Oct 29, 2018 at 11:20:00 PM
We have amazing news — we have successfully finished the production and now we are starting the shipment of your Rinsten Springs! Your Springs are already in the stock and are prepared to be shipped. That’s why very soon you will be able to enjoy the using of Spring and estimate new feelings from the cycling!
We didn’t post updates all this time because we directed all our efforts and time to produce the batch of the springs so we could be able to start shipment as soon as possible.
It was a very eventful time. Our CEO and CTO spent two months in China. They were doing a constant monitoring of all steps of the production. Also, we have implemented the video control from the factory to automate the process of production.
We have upgraded and enhanced every step of the production of the Spring.
Quality control meeting
Spring hardness control
We have been experimenting with a lot of types of paint coating and its quality and have found the best one. Moreover, now we use stamp marking on the springs instead of laser engraving. This method of application increases the anti-corrosion properties of the coating
Bag Holders are made of stainless steel, and those of you who have ordered will enjoy them a lot
The geometry of the pieces is checked constantly through all production steps
2 month at the factory, checking every step of the process
Dear backers, please check and, if necessary, update your shipping address, please. If you have any difficulties, do not hesitate to contact us: email@example.com . Our team will help you.
Thank you all! We appreciate a lot your strong patience and faith in us! It was a difficult period for all of us, but we coped with it!
And it’s all because of you!
Enjoy your Rinsten Springs!
4 months ago
– Sat, Aug 11, 2018 at 01:14:19 AM
Hello Dear Friends!
Please accept our apologies that we didn’t post any updates for so long. We had a lot of work and channelled all our resources into production.
What did we do?
First of all, our engineers made multiple tests with different heat treatment conditions to choose the most optimal for our steel. And we found one.
We had a lot of scientific work. We changed the technology of production. Springs have become much more reliable.
We found another painting factory and made samples there. Quality of painting is much better than previously.
We started the process of deleting of the frauds. It’s not so easy and needs time. But, we already stopped selling in some shops and relentlessly continue working on it.
And naturally, an update on the refunds status. Friends, we are trying to refund ASAP. Some of you already received their money. But it’s difficult for us because production of the new batch needs investments and we invest all money into it.
We are doing our best to send your pre-orders by the end of August and we are on schedule to meet this deadline. If anything will change in our schedule we will inform you immediately about that.
Once again, we are very thankful for your support. It’s not just the words, it’s really important for us to know, that so many people trust us. Many of you sending us emails with kind wishes and words of support. And every time those words of reassurance make us work even harder to deliver on our promises soonest and simply make us happy. Thank you!
Iurii Kopytsia about investigation
7 months ago
– Mon, May 28, 2018 at 10:37:58 PM
Hello, Dear Friends!
We bring our apologies that we have not been in touch for almost a month. This month was rather challenging for us. We did not know the answer to many of your questions because the investigation was in progress. And we did not know what we would discover as a result of the investigation. But now we have full information, and we can share it with you.
We have completed the investigation. We did a lot of different tests with more than 200 springs and none broke down. We conducted the investigation with the help of specialists and scientists from 3 institutes: G.S. Pisarenko Institute for Problems of Strength of the National Academy of Sciences of Ukraine, E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute". These scientists helped our engineers find the cause of the breakdown and find a solution to this problem. A material defect was not detected. So, after the tests and analyses we found out that there was a defect in a small portion of the produced springs. Less than 1%, which was due to a slight violation of the heat treatment process.
Regarding the feedback from the backers whose springs broke down, we also managed to find out,that when this happened, they just heard the sound of "crack", stopped, took off the spring, set the saddle back and continued on their journey. No one was hurt and no one fell from the bicycle.
We contacted the backers who already use the springs. Almost all of them said that they will continue to use springs. Some decided not to use the spring until we send them new ones. People of different weights, on different roads and with different settings, use Rinsten Spring and they are satisfied with their springs.
Despite the fact, that the percentage of breakage is very small, we decided to make an entirely new batch, which we will send to our backers. Of course, we understand that this is another delay, but in any case we will not send Rinsten Spring even with such small probability of breakage. Our reputation and honest name is the most valuable for us.
You believed us when you supported our project for the first time, now we ask you to support us again. But, this time not with money, but with patience. New batch will be ready in August. And we will start to send your orders immediately after it will be ready.
We are working now on refunds for those, who prefer to receive it - this is just the matter of time as the funds have been invested in production. So please rest assured, that the refund will follow - albeit maybe not right after the request, but with some reasonable wait time. We will regularly be in direct contact with all who request the refund.
On the other hand, we are full of appreciation and gratitude for your support, aired in comments and private messages alike. We, too, believe, that safety is above all and value your understanding on more time needed to produce a product with high level of reliability. We are, too, deeply concerned with the situation. We are working hard with engineers to improve the metal alloy to enhance the durability of the spring.
Our customer service agent will be in touch with any backers who experience any kind of breakage to further investigate and replace the product right away.
Once again, thank you for your trust, words of support and patience.
Together we will make this part as safe as physically possible.
Iurii & Rinsten Team
Statement by Iurii Kopytsia, the inventor of Rinsten Spring
8 months ago
– Thu, Apr 26, 2018 at 12:32:29 AM
I’m, Iurii Kopytsia, the inventor of Rinsten Spring, apologizing for the long silence.
But, we had a reasons for that.
Several springs were broken at our backers. Fortunately, no one was hurt!
I temporarily suspend the sending of the springs, until I find out the reasons.
The whole party will be returned to the factory and will take all possible measures to avoid this incident in the future.
Our experts in the field of strength of metal, are now actively working on clarifying the causes of the failure.
I hope that you accept this news with understanding. This is production. These are complex processes.
We will send all your orders, but only after I will sure of the quality of the product.
Also, we ask those who have already received springs to pay attention to the fact that the spring can bursts.
And be careful of using the spring.
In case of a breakdown, please contact us immediately: firstname.lastname@example.org
Once again I want to emphasize that this is a temporary delay.
And we'll start sending out the springs as soon as we can fix the problem.
First Backer received his Rinsten Spring!!!!
9 months ago
– Fri, Mar 09, 2018 at 11:31:36 PM
First backer from first list, which we choose by random method, received Rinsten Spring!
Thank You for your feedback!
First message we receive from Lee was:
"I GOT IT!
IT"S SO REAL COOOOOOOL~~~
THANK YOU VERY MUCH
Thank you for your photos!
And we want to share it with all of our backers!
Dear friends! We are waiting for your feedback and photos of your bikes with your Rinsten Spring on it!